Skip to Content

尊敬的客户:

目前国际形势复杂多变,关税政策尚不明朗,这可能对我们的产品价格产生一定影响。在此情况下,我们希望就订单事宜与您进行友好沟通。

基于当前的不确定性,如果您选择在此期间下单,我们将保留根据实际情况调整价格的权利。同时,我们也理解市场变化可能给您带来的困扰,因此如果在订单实际发货前因关税政策变动导致价格出现较大波动,默克将与您进行协商讨论并视情况对订单进行调整或取消。

关于应对近期政策变化的重要更新,请点击此处查看详情。

Merck
CN
HomeSmall Molecule HPLCUSP Dissolution Method for Folic Acid

USP Dissolution Method for Folic Acid

Folic Acid Tablets (USP)

Folic acid chemical

Folic acid or folate is classified as a B vitamin (B9).
Folic acid is synthetically produced, and used in fortified foods and supplements.
Folate is converted by humans to dihydrofolate (dihydrofolic acid), tetrahydrofolate (tetrahydrofolic acid), and other derivatives, which have various biological activities.

Drug dissolution testing has been carried out following the experimental conditions in the USP37-NF32 monograph for Folic Acid Tablets (using an isocratic HPLC method with RP-18 endcapped columns and thus scalable). 

A 250x4.6 mm column is prescribed with L1 packing operating at 1.0 mL/min. To improve sample throughput we have transferred this method to a 100x4.6 mm long monolithic column.

The new method turned out to be faster, having improved chromatographic resolution, lower column backpressure, and still meeting all method performance criteria compared to the prescribed column.

Dissolution <711> HPLC

Test 1
Medium: Water; 500 mL
Apparatus 2: 50 rpm
Time: 45 min
Standard solution: Solution having a known concentration of USP Folic Acid RS, corrected for water content, in Medium
Sample solution: Filtered portion of the solution under test, suitably diluted with the Medium if necessary

Analysis
Samples: Standard solution and Sample solution
Proceed as directed in the Assay, making any necessary modifications.
Calculate the percentage of the labeled amount of folic acid (C19H19N7O6) dissolved:
Result = (rU/rS) × (CS×D×V/L) × 100

rU = peak area of folic acid from the Sample solution
rS = peak area of folic acid from the Standard solution
CS = concentration of USP Folic Acid RS in the Standard solution (mg/mL)
D = dilution factor for the Sample solution
V = volume of Medium, 500 mL
L = label claim (mg/Tablet)

Assay
Mobile phase: Transfer 35.1 g of sodium perchlorate and 1.40 g of monobasic potassium phosphate to a 1-L volumetric flask. Add 7.0 mL of 1 N potassium hydroxide and 40 mL of methanol, dilute with water to volume, and mix. Adjust with 1 N potassium hydroxide or phosphoric acid to a pH of 7.2.
Diluent: Aqueous solution containing 2 mL of ammonium hydroxide and 1 g of sodium perchlorate per 100 mL
System suitability solution: 0.2 mg/mL each of USP Folic Acid RS and USP Folic Acid Related Compound A
RS in Diluent. [Note—Before use, pass through a filter of 1-μm or finer pore size. ]
Standard solution: 0.20 mg/mL of USP Folic Acid RS, corrected for water content in Diluent
Sample solution: Equivalent to 0.2 mg/mL of folic acid, from NLT 20 powdered Tablets in Diluent; shake gently to aid dissolution, and filter, discarding the first portion.
Chromatographic system (see Chromatography 621, System Suitability.)
Detector: UV 254 nm
Column: 250x4.6 mm; packing L1
Flow rate: 1 mL/min
Injection volume: 25 μL

System suitability requirement
Resolution NLT 3.6 between folic acid related compound A and folic acid

Chromolith® HighResolution RP-18 endcapped

Chromatographic Conditions
Column:Chromolith® HighResolution RP18e 100x4.6 mm (1.52022.0001)
Injection:10 μL
Detection:UV 254 nm
Cell:20 μL
Flow Rate:2.0 mL/min
Medium:Water; 500 mL
Apparatus:USP Apparatus 2 (Paddle), 50 rpm
Time:45mins
Mobile phase:Transfer 35.1 g of sodium perchlorate and 1.40 g of monobasic potassium phosphate to a 1.0 L volumetric flask. Add 7.0 mL of 1 N potassium hydroxide and 40 mL of methanol, dilute with water to volume and mix. Adjust with 1 N potassium hydroxide or phosphoric acid to a pH of 7.2.
Temperature:Ambient
Sample Preparation:10 ppm in diluent
Pressure Drop:130 Bar(1885 psi)
Retention times for standard and blank

Chromatographic Data: Standard

No.CompoundRetention Time (min)Tailing Factor
1Folic acid3.21.2
Retention time for tablet

Result (%) = (rU/rS) × (CSx D x V/L) ×V× 100

Area of Sample
Average area of StandardCS
(mg/mL)
Label claim
(mg/tablet)
Dilution FactorV Media volume
(mL)
Dissolution
(%)
95753     77.92
95451     77.67.7
95553
1228920.015
150077.75
95620     77.81
95634     77.82
Average     77.8±0.1

Tolerance: NLT 75% (Q) of the labeled amount of folic acid is dissolved.

Sign In To Continue

To continue reading please sign in or create an account.

Don't Have An Account?