产品名称
金属填充GC色谱柱（常规配置）, phase 3% Petrocol B, matrix 80/100 SUPELCOPORT support, L × O.D. × I.D. 1.7 ft (0.52 m) × 1/8 in. × 2.1 mm
material
stainless steel column
agency
ASTM® D2887
technique(s)
gas chromatography (GC): suitable
L × O.D. × I.D.
1.7 ft (0.52 m) × 1/8 in. × 2.1 mm
matrix
80/100 SUPELCOPORT support
matrix active group
3% Petrocol B phase
column type
packed GC
compatibility
for use with General Configuration
Quality Level
正在寻找类似产品? 访问 产品对比指南
General description
对于不需要玻璃惰性的低要求应用，应使用经济型的金属柱。该色谱柱具有一般性配置，并可小心将其弯曲以适用于大多数仪器。
Packed column made up of stainless steel are basically employed when higher carrier gas flow rates are employed as they can sustain elevated pressure. Stainless steel columns are usually washed with dilute hydrochloric acid, then with water followed by methanol, acetone, methylene dichloride and n-hexane in order to remove any corrosion products and traces of lubricating agents.
Legal Information
ASTM is a registered trademark of American Society for Testing and Materials
signalword
Danger
hcodes
Hazard Classifications
STOT RE 1 Inhalation
target_organs
Lungs
存储类别
6.1D - Non-combustible acute toxic Cat.3 / toxic hazardous materials or hazardous materials causing chronic effects
wgk
WGK 1
flash_point_f
Not applicable
flash_point_c
Not applicable
法规信息
新产品
此项目有
Introduction to Analytical Gas Chromatography.
Scott RPW
Science, 102-108 (1997)
A K Punetha et al.
Journal of chromatographic science, 40(7), 377-382 (2002-08-31)
The estimation of olefinic content in conversion processes such as the etherification of olefins in fluid catalytic cracking (FCC) gasoline is essentially required. Gas chromatography (GC) is the well-established method for the quantitative analysis of olefins in etherification processes. The
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系客户支持