Milliflex^® Rapid Reagent Kit

An integral component in the Milliflex Rapid Microbiology Detection and Enumeration system, the Milliflex Rapid AutoSpray Station applies an equal volume of two reagents across a membrane surface in order to detect living microorganisms.
Using a proven, pre-set automated program, the AutoSpray Station ensures reproducible results, test after test. Reagent application is achieved using a back and forth sweeping movement of the filter holder under the calibrated glass nebulizer.

Using a proven, pre-set automated program, the AutoSpray Station ensures reproducible results, test after test. Reagent application is achieved using a back and forth sweeping movement of the filter holder under the calibrated glass nebulizer.
Using a proven, pre-set automated program, the AutoSpray Station ensures reproducible results, test after test. Reagent application is achieved using a back and forth sweeping movement of the filter holder under the calibrated glass nebulizer.

Using a proven, pre-set automated program, the AutoSpray Station ensures reproducible results, test after test. Reagent application is achieved using a back and forth sweeping movement of the filter holder under the calibrated glass nebulizer.

Pinch valves ensure that the same volume of reagent is dispensed during each cycle. An internal compressor allows stand-alone operation, eliminating the need for additional equipment.
In automatic spray mode, the AutoSpray Station delivers both reagents in 90 seconds at the touch of a button.
From the control panel, analysts can easily initiate an operation by selecting from a list of operations

包含 - ATP 释放剂、2 个瓶；生物发光试剂、2 个瓶；置换缓冲液、无菌、2 个瓶；2 个注射器、5 个 Luer-Lok 盖、6 个瓶接头

Target Microorganisms: 整体厌氧微生物

假单胞菌

酵母菌和霉菌

MILLIFLEX is a registered trademark of Merck KGaA, Darmstadt, Germany