跳转至内容
Merck
CN
  • Individualizing oral busulfan dose after using a test dose in patients undergoing hematopoietic stem cell transplantation: pharmacokinetic characterization.

Individualizing oral busulfan dose after using a test dose in patients undergoing hematopoietic stem cell transplantation: pharmacokinetic characterization.

Therapeutic drug monitoring (2015-01-15)
Cristiane Effting, Adriano de Moraes Arantes, Luciana V Queiroz Labre, Wilsione J Carneiro, Jerônimo R de Oliveira Neto, César Bariani, Caroline R Rodrigues, Andryne R Rodrigues, Luiz C Cunha
摘要

Busulfan is an alkylating agent used for conditioning patients undergoing hematopoietic stem cell transplantation with a narrow therapeutic range and highly variable pharmacokinetics. High concentrations induce toxicity, especially hepatic veno-occlusive disease, also referred to as sinusoidal obstruction syndrome. This study aimed to assess busulfan pharmacokinetic variability in pretransplant conditioning regimens using an analytical method validated by high-performance liquid chromatography coupled to diode array detector (HPLC/PDA). Eight patients who used the test dose (TD) of 1 mg/kg busulfan 10 days before conditioning were included, and 10 serial blood samples were collected to determine: the elimination half-life (t1/2), total area under the curve (AUCT), total clearance (Cl(T)/F), and plasma concentration at steady state (C(ss)), using a monocompartmental model and first-order kinetics. The instrumental conditions were: HPLC/PDA Shimadzu, column ACE C18 (150 mm × 4 mm); methanol/water/acetonitrile (65:20:15) eluent flow rate of 1 mL/min; 1,6-bis-(methanesulfonyloxy)-hexane; UV λ = 276 nm; analysis time 17 minutes; and derivatization with sodium diethylcarbamate. The dose was adjusted, and 4 blood samples per day were collected at days 2, 3, and 4 of treatment for new plasma determinations. Four patients needed higher doses; the mean dose administered was 1.02 ± 0.19 mg/kg. Mean results at TD: t1/2 = 2.88 ± 0.5 hours; Cl(T)/F = 0.18 ± 0.03 L · h(-1) · kg(-1); AUC(T) = 5461.00 ± 961.15 ng · mL(-1) · h(-1); and C(ss) = 911.3 ± 159.8 ng/mL. Mean results of samples collected during conditioning: t1/2 = 3.21 ± 0.9 hours; Cl(T)/F = 0.13 ± 0.02 L · h(-1) · kg(-1); AUC(T) = 7571 ± 1705 ng · mL(-1) · h(-1); and C(ss) = 1262.0 ± 284.3 ng/mL. High variability in the assessed pharmacokinetic parameters was observed, with a 38% variation in C(ss) between TD and conditioning regimen; Cl(T)/F decreased by 30%, suggesting drug accumulation after multiple-dose regimen. Although being lower than reported in the literature, this variation may be associated with toxicity of the proposed treatment, justifying patient monitoring and enhancing validity of previous pharmacokinetic evaluation using TD regimen.

材料
货号
品牌
产品描述

Sigma-Aldrich
乙腈, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
甲醇, suitable for HPLC, ≥99.9%
Sigma-Aldrich
甲醇, ACS reagent, ≥99.8%
Sigma-Aldrich
乙酸乙酯, ACS reagent, ≥99.5%
Sigma-Aldrich
甲醇, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
乙酸乙酯, suitable for HPLC, ≥99.7%
Sigma-Aldrich
乙腈, anhydrous, 99.8%
Sigma-Aldrich
甲醇, HPLC Plus, ≥99.9%
Sigma-Aldrich
乙酸乙酯, HPLC Plus, for HPLC, GC, and residue analysis, 99.9%
Sigma-Aldrich
正己烷, suitable for HPLC, ≥97.0% (GC)
Sigma-Aldrich
乙腈, ACS reagent, ≥99.5%
Sigma-Aldrich
正己烷, ReagentPlus®, ≥99%
Sigma-Aldrich
正己烷, suitable for HPLC, ≥95%
Sigma-Aldrich
乙腈, for HPLC, for UV, ≥99.9% (GC)
Sigma-Aldrich
正己烷, Laboratory Reagent, ≥95%
Sigma-Aldrich
乙腈, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
甲醇, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
甲醇, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
正己烷, HPLC Plus, for HPLC, GC, and residue analysis, ≥95%
Sigma-Aldrich
甲醇, anhydrous, 99.8%
Sigma-Aldrich
正己烷, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99% (GC)
Sigma-Aldrich
甲醇, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
乙酸乙酯, suitable for HPLC, ≥99.8%
Sigma-Aldrich
甲醇, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
乙酸乙酯, anhydrous, 99.8%
Sigma-Aldrich
甲醇, BioReagent, ≥99.93%
Sigma-Aldrich
乙腈, suitable for HPLC-GC, ≥99.8% (GC)
Sigma-Aldrich
乙酸乙酯, puriss., meets analytical specification of Ph. Eur., BP, NF, ≥99.5% (GC)
Sigma-Aldrich
正己烷, anhydrous, 95%
Sigma-Aldrich
乙酸乙酯, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.5% (GC)