推荐产品
等级
certified reference material
pharmaceutical secondary standard
质量水平
Agency
traceable to USP 1082606
蒸汽密度
4 (vs air)
蒸汽压
15 mmHg ( 25 °C)
8 mmHg ( 20 °C)
CofA
current certificate can be downloaded
自燃温度
790 °F
expl. lim.
7.6 %
技术
HPLC: suitable
gas chromatography (GC): suitable
折射率
n20/D 1.394 (lit.)
沸点
124-126 °C (lit.)
mp
−78 °C (lit.)
密度
0.88 g/mL at 25 °C (lit.)
应用
pharmaceutical (small molecule)
包装形式
neat
储存温度
2-30°C
SMILES字符串
CCCCOC(C)=O
InChI
1S/C6H12O2/c1-3-4-5-8-6(2)7/h3-5H2,1-2H3
InChI key
DKPFZGUDAPQIHT-UHFFFAOYSA-N
正在寻找类似产品? 访问 产品对比指南
相关类别
一般描述
Pharmaceutical secondary standards for application in quality control, provide pharma laboratories and manufacturers with a convenient and cost-effective alternative to the preparation of in-house working standards.
应用
These Secondary Standards are qualified as Certified Reference Materials. These are suitable for use in several analytical applications including but not limited to pharma release testing, pharma method development for qualitative and quantitative analyses, food and beverage quality control testing, and other calibration requirements.
分析说明
These secondary standards offer multi-traceability to the USP, EP (PhEur) and BP primary standards, where they are available.
其他说明
This Certified Reference Material (CRM) is produced and certified in accordance with ISO 17034 and ISO/IEC 17025. All information regarding the use of this CRM can be found on the certificate of analysis.
附注
To see an example of a Certificate of Analysis for this material enter LRAA9024 in the slot below. This is an example certificate only and may not be the lot that you receive.
推荐产品
Find a digital Reference Material for this product available on our online platform ChemisTwin® for NMR. You can use this digital equivalent on ChemisTwin® for your sample identity confirmation and compound quantification (with digital external standard). An NMR spectrum of this substance can be viewed and an online comparison against your sample can be performed with a few mouseclicks. Learn more here and start your free trial.
警示用语：
Warning
危险声明
危险分类
Flam. Liq. 3 - STOT SE 3
靶器官
Respiratory system
补充剂危害
储存分类代码
3 - Flammable liquids
WGK
WGK 1
闪点(°F)
80.6 °F - closed cup
闪点(°C)
27 °C - closed cup
法规信息
危险化学品
F J Alvarez-Hornos et al.
Journal of environmental management, 92(8), 1978-1985 (2011-05-03)
The effect of using ground tire rubber (GTR) as an adsorptive material in the removal of a 2:1:1 weight mixture of n-butyl acetate, toluene and m-xylene by using a peat biofilter under different intermittent conditions was investigated. The performance of
Andréa B Martins et al.
Ultrasonics sonochemistry, 20(5), 1155-1160 (2013-03-05)
The influence of low-frequency ultrasound (40 kHz) in the esterification reaction between acetic acid and butanol for flavor ester synthesis catalyzed by the commercial immobilized lipase B from Candida antarctica (Novozym 435) was evaluated. A central composite design and the
Matias Rauma et al.
Journal of pharmaceutical sciences, 98(11), 4365-4375 (2009-03-14)
Recent work in our laboratory shows that it is possible to reproducibly measure the weight change over time of a piece of porcine skin exposed to a chemical vapor by thermogravimetric analysis (TGA), that is, using a microbalance maintained at
Sami H Ali et al.
Bioresource technology, 102(21), 10094-10103 (2011-09-13)
Butyl acetate holds great potential as a sustainable biofuel additive. Heterogeneously catalyzed transesterification of biobutanol and bioethylacetate can produce butyl acetate. This route is eco-friendly and offers several advantages over the commonly used Fischer Esterification. The Amberlite IR 120- and
P Xiao et al.
International journal of pharmaceutics, 406(1-2), 111-113 (2011-01-22)
This work describes the first application of Opto-Thermal Transient Emission Radiometry (OTTER), an infrared remote sensing technique, to probe the extent to which solvents permeate the human nail in vivo. Decanol, glycerol and butyl acetate were selected as model solvents.
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系技术服务部门