跳转至内容
Merck
CN
所有图片(1)

文件

安全信息

KGW9A3TTT1

Millipore

Polysep™ II 2.0/1.2 µm nominal, Opticap® XLT Capsule

Opticap® XLT 30, inlet connection diam. 1.5 in., pore size 2.0/1.2 μm, cartridge nominal length 30 in. (75 cm)

登录查看公司和协议定价
所有图片(1)
别名:
Opticap XLT30 Polysep II 2.0/1.2 μm 1-1/2 in. TC
UNSPSC代码:
23151806
eCl@ss:
32031610

物料

borosilicate glass fiber (BGF) membrane
mixed cellulose esters (MCE) membrane
polypropylene
polypropylene housing
polypropylene support
polypropylene vent cap
silicone seal

质量水平

400

管理合规性

meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)

无菌性

non-sterile

灭菌适用性

autoclavable compatible

产品线

Opticap® XLT 30

特点

hydrophilic

制造商/商品名称

Opticap®

参数

1.0 bar max. inlet pressure (15 psi) at 80 °C
2.75 bar max. inlet pressure (40 psi) at 60 °C
25 °C max. inlet temp.
3.5 bar max. differential pressure (50 psid) at 25 °C
5.5 bar max. inlet pressure (80 psi) at 23 °C
80 psig max. inlet pressure

技术

prefiltration: suitable

长度

87.1 cm (34.3 in.)

纯化柱标称长度

30 in. (75 cm)

过滤面积

1.38 m2

入口接头直径

1.5 in.

入口至出口宽度

15.2 cm (6.0 in.)

出口接头直径

1.5 in.

杂质

≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
<0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)

重量萃取物

≤435 mg/capsule

基质

Polysep™ II

pore size

2.0/1.2 μm nominal pore size
2.0/1.2 μm pore size

输入

sample type liquid

配件

inlet sanitary flange
 outlet sanitary flange
 (38 mm (1 1/2 in.) Sanitary Flange Inlet and Outlet)

正在寻找类似产品? 访问 产品对比指南

相关类别

一般描述

Device Configuration: 取样皿滤膜
T-line/Gauge Port: T-line

特点和优势

Format: Double Layer

包装

Double Easy-Open bag

其他说明

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Directions for Use:
  • Organism Retention: Microorganism
  • Mode of Action: Filtration (size exclusion)
  • Application: BioProcessing
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer to the first page of Visual Inspection Guide and introduction section of the Mixed cellulose esters Tech Brief
  • Storage Statement: Please refer to the Mixed cellulose esters Tech Brief
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

制备说明

Sterilization Method
3 autoclave cycles of 30 min @ 121 °C; not in-line steam sterilizable
This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

分析说明

Gravimetric Extractables: after a 15 L flush and 24 hours in water at controlled room temperature
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥15 L

法律信息

OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany
Polysep is a trademark of Sigma-Aldrich Co. LLC

WGK

WGK 2

法规信息

新产品

分析证书(COA)

输入产品批号来搜索 分析证书(COA) 。批号可以在产品标签上"批“ （Lot或Batch）字后找到。

已有该产品？

在文件库中查找您最近购买产品的文档。

访问文档库

我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.

联系技术服务部门