登录 查看组织和合同定价。
选择尺寸
关于此项目
UNSPSC Code:
12352203
NACRES:
NA.41
eCl@ss:
32160702
Conjugate:
unconjugated
Clone:
polyclonal
Application:
ELISA
immunocytochemistry
immunohistochemistry (formalin-fixed, paraffin-embedded sections)
radioimmunoassay
western blot
immunocytochemistry
immunohistochemistry (formalin-fixed, paraffin-embedded sections)
radioimmunoassay
western blot
Species reactivity:
rat, human
Citations:
20
Technique(s):
ELISA: suitable
immunocytochemistry: suitable
immunohistochemistry (formalin-fixed, paraffin-embedded sections): suitable
radioimmunoassay: suitable
western blot: suitable
immunocytochemistry: suitable
immunohistochemistry (formalin-fixed, paraffin-embedded sections): suitable
radioimmunoassay: suitable
western blot: suitable
Uniprot accession no.:
产品名称
抗骨涎蛋白II 抗体, serum, Chemicon®
biological source
rabbit
conjugate
unconjugated
antibody form
serum
antibody product type
primary antibodies
clone
polyclonal
species reactivity
rat, human
manufacturer/tradename
Chemicon®
technique(s)
ELISA: suitable
immunocytochemistry: suitable
immunohistochemistry (formalin-fixed, paraffin-embedded sections): suitable
radioimmunoassay: suitable
western blot: suitable
NCBI accession no.
UniProt accession no.
shipped in
wet ice
target post-translational modification
unmodified
Quality Level
Gene Information
human ... IBSP(3381)
rat ... Ibsp(24477)
Application
抗骨涎蛋白II 抗体是针对骨涎蛋白的抗体,用于ELISA、IC、IH、IH(P)、RIA & WB 。
蛋白质印迹
免疫组化(石蜡)(参见以下建议的方案)
免疫细胞化学(1:100)
RIA
ELISA
最佳工作稀释度必须由最终用户确定。
兔抗骨涎蛋白1854的建议染色步骤
该方案已用于来自人胚胎胫骨、人胚胎颅顶、转移至骨骼的人乳腺肿瘤的、经过10%甲酸脱钙处理的5 um石蜡包埋切片。
1.脱蜡:二甲苯 5 分钟 - 二甲苯 5 分钟. - 二甲苯 5 分钟
2.再水化:100%乙醇 3 分钟 - 95% 乙醇 3 分钟 - 70% 乙醇 3 分钟
3.以流动的自来水清洗切片5分钟。
4.在PBS中清洗切片。
5.封闭内源性过氧化物酶:0.3%过氧化氢的无水甲醇溶液(2 mL 30% H2O2溶于198 mL 甲醇)处理30分钟。(用铝箔盖上瓶子,培养过程中搅拌)
6.以流动的自来水清洗切片10分钟
7.用免疫组化笔标记组织区。
8.以300 mL 封闭液盖住组织区,在室温下培养30分钟(封闭液:6 mL PBS、0.3 gm BSA、120 mL 正常山羊血清)。
9.抖掉多余的液体(不要清洗)。
10.与一抗(AB1854,在PBS-T中稀释为1:2,500 i)一起在2-8°C 下在潮湿的培养箱中过夜培养。
11.在室温下以PBS-T冲洗,再以PBS-T清洗3次,每次5分钟。
12.与生物素化二抗(如 Chemicon AP132B)一起在室温下培养30分钟。
13.在室温下以PBS-T冲洗,再以PBS-T清洗3次,每次5分钟。
14.在室温下将切片与Vector ABC试剂一起培养30分钟。(ABC试剂:2滴A和2滴B,溶于 5 mL PBS,使用前在室温下静置30分钟)
15.在室温下以PBS-T冲洗切片3次,每次5分钟。
16.以DAB展开5-10分钟。
17.以流动的自来水清洗。
18.以Mayer′s HX 对比染色(Counter stain )45 秒,以流动的自来水清洗 。
19.脱水:70%乙醇 - 95% 乙醇 - 100% 乙醇,每次1分钟。
20.以二甲苯清洗、安装切片、干燥。
免疫组化(石蜡)(参见以下建议的方案)
免疫细胞化学(1:100)
RIA
ELISA
最佳工作稀释度必须由最终用户确定。
兔抗骨涎蛋白1854的建议染色步骤
该方案已用于来自人胚胎胫骨、人胚胎颅顶、转移至骨骼的人乳腺肿瘤的、经过10%甲酸脱钙处理的5 um石蜡包埋切片。
1.脱蜡:二甲苯 5 分钟 - 二甲苯 5 分钟. - 二甲苯 5 分钟
2.再水化:100%乙醇 3 分钟 - 95% 乙醇 3 分钟 - 70% 乙醇 3 分钟
3.以流动的自来水清洗切片5分钟。
4.在PBS中清洗切片。
5.封闭内源性过氧化物酶:0.3%过氧化氢的无水甲醇溶液(2 mL 30% H2O2溶于198 mL 甲醇)处理30分钟。(用铝箔盖上瓶子,培养过程中搅拌)
6.以流动的自来水清洗切片10分钟
7.用免疫组化笔标记组织区。
8.以300 mL 封闭液盖住组织区,在室温下培养30分钟(封闭液:6 mL PBS、0.3 gm BSA、120 mL 正常山羊血清)。
9.抖掉多余的液体(不要清洗)。
10.与一抗(AB1854,在PBS-T中稀释为1:2,500 i)一起在2-8°C 下在潮湿的培养箱中过夜培养。
11.在室温下以PBS-T冲洗,再以PBS-T清洗3次,每次5分钟。
12.与生物素化二抗(如 Chemicon AP132B)一起在室温下培养30分钟。
13.在室温下以PBS-T冲洗,再以PBS-T清洗3次,每次5分钟。
14.在室温下将切片与Vector ABC试剂一起培养30分钟。(ABC试剂:2滴A和2滴B,溶于 5 mL PBS,使用前在室温下静置30分钟)
15.在室温下以PBS-T冲洗切片3次,每次5分钟。
16.以DAB展开5-10分钟。
17.以流动的自来水清洗。
18.以Mayer′s HX 对比染色(Counter stain )45 秒,以流动的自来水清洗 。
19.脱水:70%乙醇 - 95% 乙醇 - 100% 乙醇,每次1分钟。
20.以二甲苯清洗、安装切片、干燥。
Biochem/physiol Actions
人和大鼠骨涎蛋白(BSP) 。在RIA 或 ELISA中与人骨桥蛋白或骨粘连蛋白没有交叉反应。
其他物种尚未经过测试
General description
骨涎蛋白II 是骨骼细胞外基质中的主要非胶原蛋白之一。它是一种磷酸化糖蛋白,分子量大约为70 kDa。该蛋白存在于成骨细胞和骨细胞中。涉及骨转换(bone turnover)的疾病、病理性骨改变以及骨质疏松症的迅速增多使得我们需要确立新的标志物,骨涎蛋白就是一种用于监控骨重塑(bone remodelling)的潜在血清标志物。
Physical form
冻干。在 100 μL 实验室用水(aqua bidest)中重悬。不含防腐剂。
Preparation Note
将未稀释的等分试样在2-8°C(冻干)或 -20°C(复溶)下可保持最多 6 个月。应避免反复冻/融循环。
Legal Information
CHEMICON is a registered trademark of Merck KGaA, Darmstadt, Germany
未找到合适的产品?
试试我们的产品选型工具.
存储类别
10 - Combustible liquids
wgk
WGK 1
flash_point_f
Not applicable
flash_point_c
Not applicable
Loss of MMP-2 in murine osteoblasts upregulates osteopontin and bone sialoprotein expression in a circuit regulating bone homeostasis.
Mosig, RA; Martignetti, JA
Disease models & mechanisms null
MG63 osteoblast-like cells exhibit different behavior when grown on electrospun collagen matrix versus electrospun gelatin matrix.
Tsai, SW; Liou, HM; Lin, CJ; Kuo, KL; Hung, YS; Weng, RC; Hsu, FY
Testing null
Y-C Huang et al.
Gene therapy, 12(5), 418-426 (2005-01-14)
Gene therapy approaches to bone tissue engineering have been widely explored. While localized delivery of plasmid DNA encoding for osteogenic factors is attractive for promoting bone regeneration, the low transfection efficiency inherent with plasmid delivery may limit this approach. We
Cristina Correia et al.
PloS one, 6(12), e28352-e28352 (2011-12-14)
Tissue engineering provides unique opportunities for regenerating diseased or damaged tissues using cells obtained from tissue biopsies. Tissue engineered grafts can also be used as high fidelity models to probe cellular and molecular interactions underlying developmental processes. In this study
Majd Machour et al.
Advanced science (Weinheim, Baden-Wurttemberg, Germany), 9(34), e2200882-e2200882 (2022-10-20)
3D bioprinting holds great promise for tissue engineering, with extrusion bioprinting in suspended hydrogels becoming the leading bioprinting technique in recent years. In this method, living cells are incorporated within bioinks, extruded layer by layer into a granular support material
我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系客户支持