Duran^® Connection Cap System Gl 45 With Cyan Pp Screw Cap

The DURAN^® 4-port connector cap is manufactured using an innovative additive manufacturing method called three-dimensional metal printing. This method allows the complex form to be optimised using computer-aided design software, as well as significantly reducing the amount of metal required for construction. The transfer connection cap can be used with all sizes of DURAN^® GL 45 bottles, and facilitates the movement of liquids within a closed and aseptic system. The four male hose connectors are suitable for flexible tubing with a 6.4 mm (1/4") inner diameter. This corresponds to the SDD initiative Size A tubing type, allowing easy connection to buffer bags, mixing systems, etc. Freely rotating stainless steel centre allows the bottle to be unscrewed without the need to disconnect the tubing. Connectors and body are manufactured from Type 316L (1.4404 / S31603) stainless steel. A silicone gasket and the GL 45 screw cap provide a liquid tight seal. Wide temperature usage range (up to 180 °C). Autoclavable (121 °C for 15 minutes). Lot coded for full traceability and certification. Ideal for chemistry, life science and biopharma laboratories.

small volumes of liquid need to be sampled or dispensed, such as a media supply for small bioreactors, in a perfusion circuit for cell culture, or oxygenation of very small samples

for 45 GL bottles Construction materials are certified as approved for food contact, and offer a high temperature resistance (up to 180 °C). The caps are fully autoclavable (121 °C / 15 minutes) and reusable

DURAN is a registered trademark of DWK Life Sciences