918571
3D Printable Yttria-stabilized Zirconium(IV) Oxide Ink
别名:
3D printable ceramic ink, 3Y-ZrO2 ink, YSZ ink, Yttria stabilized zirconia ink, Yttrium stabilized zirconium oxide ink
description
Printing methods compatible with: Direct-Ink-Writing 3D printing
form
paste
greener alternative product characteristics
Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.
sustainability
Greener Alternative Product
concentration
70 wt. % (Yttria stabilized zirconia)
color
white
particle size
120 nm
viscosity
2-25 Pa.s (25 °C at shear rate of 100 s-1)
greener alternative category
storage temp.
2-8°C
Disclaimer
Handeling tips:
- Store in an airtight sealed container in refrigerator.
- Avoid exposure to heat.
- Add the thermal initiator (product No.479896) to 0.3wt% of the total 3Y-ZrO2/PEGDA ink mass, and mix well before usage.
General description
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Green Chemistry. This product has been enhanced for energy efficiency. Click here for more information.
Application
This product can be used in material extrusion 3D printing technique.
This product is a thixotropic ink based on yttria stabilized zirconia (YSZ) nanoparticles. It is suitable for various direct ink write (aka robocasting) printing technologies . Our YSZ ink has also been validated for stereolithography (SLA) 3D printing. The ink offers a stable dispersion of YSZ, high viscosity, good printability, and long shelf life. Annealed patterns provide excellent chemical resistance and high surface area. The ink is suitable for applications such as membranes, catalysis, separators and reactors.
Preparation Note
Step-by-Step procedure for ink mixing and loading into syringe is in attached file.
Direct-Ink-Writing (DIW) Notes:
Post Processing of DIW printed parts:
Ramp to 300°C @ 1°C/min. Hold for 4 hours.
Ramp to 400°C @ 1°C/min. Hold for 2 hours.
Ramp to 800°C @ 2°C/min. Hold for 4 hours.
Ramp to 1090°C @ 2°C/min. Hold for 15 hours.
Ramp down to 50°C @ 2°C/min.
Direct-Ink-Writing (DIW) Notes:
- Syringe Nozzle sizes ranging from 250 μm − 800 μm can be used.
- Initial pressure for DIW printing ranges from 12-18 psi, depending on nozzle diameter used.
Post Processing of DIW printed parts:
- Curing @ 110°C for 12-16 hours.
- Sintering using the following sequence:
Ramp to 300°C @ 1°C/min. Hold for 4 hours.
Ramp to 400°C @ 1°C/min. Hold for 2 hours.
Ramp to 800°C @ 2°C/min. Hold for 4 hours.
Ramp to 1090°C @ 2°C/min. Hold for 15 hours.
Ramp down to 50°C @ 2°C/min.
Tighly seal remaining ink, and store in 2-8° C fridge.
signalword
Danger
hcodes
Hazard Classifications
Eye Dam. 1 - Skin Irrit. 2 - Skin Sens. 1 - STOT SE 3
target_organs
Respiratory system
存储类别
10 - Combustible liquids
wgk
WGK 3
法规信息
新产品
此项目有
3D-printed nanoporous ceramics: Tunable feedstock for direct ink write and projection microstereolithography
Alyssa L. Troksa et al.
Materials & Design, 198 , 109337-109337 (2021)
3D printing of ceramics: A review.
Chen Z, et al.
J. Eur. Ceram. Soc., 39(4), 661-687 (2019)
Synthesis of Highly Porous Yttria-Stabilized Zirconia by Tape-Casting Methods.
Boaro M, et al.
Journal of the American Ceramic Society. American Ceramic Society, 395-400 (2004)
商品
Additive manufacturing combined with nanomaterial-based inks enhances material properties, particularly in energy and environmental applications.
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系客户支持