SMILES string
[Ti](=O)=O
InChI
1S/2O.Ti
InChI key
GWEVSGVZZGPLCZ-UHFFFAOYSA-N
description
Crystal Structure: > 99% anatase (analysis carried out on starting material, prior to paste manufacture)
form
paste (white)
concentration
20.0 wt. % (+/- 1.2 wt%)
avg. part. size
150-250 nm (scatter)
viscosity
15000-25000 mPa.s (Analysis carried out with 20mm 4 degree cone/plate; 40 s-1)
Quality Level
Application
Scattering Titania Paste contains highly dispersed anatase scattering particles (150nm to 250nm). This paste produces a non-active scattering layer when applied onto a pre-printed active layer.
After drying; this paste must be fired – together with the pre-printed active layers – at or above 500°C. This results in an opaque sintered layer; with a thickness of ~3μm for one printed layer; when using a 90T mesh screen.
Storage: Store in the dark at 20°C
General description
Legal Information
Greatcell Solar® is a registered trademark of Greatcell Solar
signalword
Warning
hcodes
Hazard Classifications
Eye Irrit. 2 - Skin Irrit. 2
存储类别
10 - Combustible liquids
wgk
WGK 1
flash_point_f
195.8 °F
flash_point_c
91 °C
商品
Few Monolayer Atomic Layer Deposition (ALD) on Surfaces and Interfaces for Energy Applications
Progress in solution-processed functional materials leads to thin-film optoelectronic devices for industrial and consumer electronics.
Professors Tokito and Takeda share design principles and optimization protocols for organic electronic devices, focusing on flexibility and low cost.
While dye sensitization as the basis for color photography has been accepted for a very long time,1 attempts to use this principle for the conversion of solar light to electricity generally had resulted only in very low photocurrents, below 100 nA/cm
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系客户支持