44504
Dowex 50W X8 Ion Exchange Resin
hydrogen form, 16-50 mesh, strongly acidic
About This Item
Recommended Products
Product Name
Dowex 50W X8, hydrogen form, strongly acidic, 16-50 mesh
description
cross-linkage 8%
Quality Level
form
beads
moisture
50-58%
technique(s)
LPLC: suitable
matrix
styrene divinylbenzene (gel)
matrix active group
sulfonic acid functional group
particle size
16-50 mesh
capacity
1.1 meq/mL by wetted bed volume
separation technique
cation exchange
SMILES string
C(C)c3c(cccc3)C=C.c2(c(cccc2)C=C)C=C.c1(ccccc1)C=C
InChI
1S/C10H12.C10H10.C8H8/c2*1-3-9-7-5-6-8-10(9)4-2;1-2-8-6-4-3-5-7-8/h3,5-8H,1,4H2,2H3;3-8H,1-2H2;2-7H,1H2
InChI key
NWUYHJFMYQTDRP-UHFFFAOYSA-N
Looking for similar products? Visit Product Comparison Guide
Related Categories
General description
Application
- As stripper resin and can be regenerated by 0.25N sulphuric acid when exhausted.
- As a catalyst.
- In deionizing supernatant fraction samples for paper chromatography.
Dowex 50WX8 hydrogen form may be used in separation medium for TLC, paper chromatography and LPLC.
Legal Information
Signal Word
Warning
Hazard Statements
Precautionary Statements
Hazard Classifications
Eye Irrit. 2
Storage Class Code
11 - Combustible Solids
WGK
WGK 3
Flash Point(F)
Not applicable
Flash Point(C)
Not applicable
Personal Protective Equipment
Choose from one of the most recent versions:
Certificates of Analysis (COA)
Don't see the Right Version?
If you require a particular version, you can look up a specific certificate by the Lot or Batch number.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Which document(s) contains shelf-life or expiration date information for a given product?
If available for a given product, the recommended re-test date or the expiration date can be found on the Certificate of Analysis.
How do I get lot-specific information or a Certificate of Analysis?
The lot specific COA document can be found by entering the lot number above under the "Documents" section.
What is the form of Product 44504, Dowex® 50W X8?
This resin is a strongly acidic cation exchanger, in the H+ ionic form.
What is a p.a. grade?
Pro analysi (per analysis, or p.a.) grade chemicals are tested to similar - although not identical - standards as are ACS reagents. P.a. grade material are suitable for many routine laboratory applications.
What is the particle size of Product 44504, Dowex® 50W X8?
The mesh size (20-50 mesh) corresponds to a particle size range of approximately 300 to 850 microns.
What is the matrix for the Dowex® 50W X8 resin, Product 44504?
The fine mesh resin is based on a microporous copolymer of styrene and divinylbenzene (DVB) (styrene-DVB gel).
What is the total exchange capacity of the Dowex® 50W X8 resin, Product 44504, in equivalents per Liter (eq/L)?
The exchange capacity is approximately 1.7 eq/L or meq/mL. One equivalent means one mole of ionizable functional group on the resin.
What is the suggested operating temperature for Dowex® 50W X8 resin, Product 44504?
At elevated temperature, operation can cause degradation of functional sites and loss of the ion exchange capacity. The resin degradation depends on many variables, such as the level of dissolved oxygen and the presence of catalytic metals on the resin. In general, ~120oC (250oF) is suggested as the maximum operating temperature.
What are the proper storage conditions for Dowex® 50W X8 resin, Product 44504?
The resins should be stored in a dry cool place. The storage temperature should be kept below 50oC (120oF).Storage temperature below 0oC can cause resin freezing and temperatures below -18oC (0oF) should be avoided. Repeated freeze-thaw can cause damage on the beads. The frozen resin beads should be completely thawed out at room temperature condition before loading and use.
What information do you have on the stability of Dowex® 50W X8 resin, Product 44504?
The ion exchange resin is tolerant of a wide range of chemical conditions, including most inorganic and organic solutions with exception of strong oxidizing agents. Solutions, such as nitric or chromic acid, bleach or chlorine-generating solutions as well as peroxide should be avoided as these will result in rapid oxidation. Exposure of resins to metal ions, such as iron, manganese and copper should be minimized in oxidizing environments as they can catalyze the oxidation.
How do I find price and availability?
There are several ways to find pricing and availability for our products. Once you log onto our website, you will find the price and availability displayed on the product detail page. You can contact any of our Customer Sales and Service offices to receive a quote. USA customers: 1-800-325-3010 or view local office numbers.
What is the Department of Transportation shipping information for this product?
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
How can I convert a cation exchange resin from the hydrogen form to the sodium form?
To convert a cation exhcange resin from the hydrogen form to the sodium form, use two to four bed volumes of 0.5-2.0% NaCl or NaOH.
My question is not addressed here, how can I contact Technical Service for assistance?
Ask a Scientist here.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service