STC21THN
Lynx® ST
1/2" Lynx® ST Connector, 1.5" TC inlet and 1/2" hose barb outlet
Synonym(s):
Steam-To aseptic connector, connect hard piped equipment with single use tubing
About This Item
Recommended Products
material
molded polyetherimide (21 CFR part 177.1595)
platinum cured silicone seal (21 CFR part 177.2600)
Quality Level
sterility
non-sterile
product line
Lynx®
parameter
temperature (SIP : 4X at 145°C /293°F for 30 min. Closed)
0.7 bar max. pressure (10 psi) at 4-80 °C (during actuation)
23 L/min flow rate at 0.6 bar (9 psi)
38 L/min flow rate at 1.8 bar (26 psi)
6.8 bar max. pressure (100 psi) at 4-80 °C (operating pressure)
8 L/min flow rate at 0.1 bar (1.5 psi)
L × W
9.5 cm (3.75 in.) × 9.2 cm (3.6 cm)
fitting
1.5 in. Tri-Clover inlet
1/2 in. outlet hose barb
Application
Preparation Note
Gamma compatible up to 50 kGy; Steam @ 135 °C for 30 min (closed) 2 times
Legal Information
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service