1.06469
Sodium hydroxide
pellets for analysis (max. 0.02% K) EMSURE® ACS,Reag. Ph Eur,ISO
Recommended Products
grade
ACS reagent
Quality Level
Agency
reag. ISO
reag. Ph. Eur.
vapor density
>1 (vs air)
vapor pressure
<18 mmHg ( 20 °C)
3 mmHg ( 37 °C)
product line
EMSURE®
Assay
99-100% (total alkilinity calculated as NaOH)
form
pellets
impurities
≤0.0003% Total nitrogen (N)
pH
>14 (20 °C, 100 g/L in H2O)
mp
318 °C (lit.)
solubility
water: 1090 g/L at 20 °C
density
2.13 g/cm3 at 20 °C
anion traces
carbonate (as Na2CO3): ≤0.5%
chloride (Cl-): ≤0.0005%
phosphate (PO43-): ≤0.0005%
silicate (as SiO2): ≤0.001%
sulfate (SO42-): ≤0.0005%
cation traces
Al: ≤0.0005%
As: ≤0.0001%
Ca: ≤0.0005%
Cu: ≤0.0002%
Fe: ≤0.0005%
Hg: ≤0.00001%
K: ≤0.020%
Mg: ≤0.0005%
Ni: ≤0.0005%
Pb: ≤0.0005%
Zn: ≤0.001%
heavy metals (as Ag): ≤0.0005%
heavy metals (as Pb): ≤0.0005%
storage temp.
2-30°C
SMILES string
[OH-].[Na+]
InChI
1S/Na.H2O/h;1H2/q+1;/p-1
InChI key
HEMHJVSKTPXQMS-UHFFFAOYSA-M
Looking for similar products? Visit Product Comparison Guide
Related Categories
Application
- Biosorbent derived from coffee husk for efficient removal of toxic heavy metals from wastewater.: Researchers developed a biosorbent from coffee husk to remove heavy metals from wastewater. Sodium hydroxide plays a critical role in the chemical activation of the coffee husk, enhancing its adsorption capacity (Quyen et al., 2021).
- Development of Advanced Chemometric-Assisted Spectrophotometric Methods for the Determination of Cromolyn Sodium and Its Alkaline Degradation Products.: This paper presents advanced spectrophotometric methods for analyzing cromolyn sodium and its degradation products. Sodium hydroxide is used to induce the degradation of cromolyn sodium, allowing for the study of its breakdown products (El Zahar et al., 2020).
- High resolution and high throughput analytical methods for d-tagatose and process related impurities using capillary electrophoresis.: The study develops capillary electrophoresis methods for analyzing d-tagatose and its impurities. Sodium hydroxide is employed as an electrolyte to enhance the separation and resolution in the electrophoresis process (Surapureddi et al., 2020).
- Phosphorus in recycling fertilizers - analytical challenges.: This research addresses the analytical challenges in determining phosphorus in recycling fertilizers. Sodium hydroxide is used to adjust the pH of samples, which is crucial for accurate phosphorus quantification (Krüger and Adam, 2017).
Linkage
Analysis Note
Assay (total alkalinity calc. as NaOH): 99 - 100 %
Identity: passes test
Appearance of solution: passes test
Carbonate (as Na₂CO₃): ≤ 0.5 %
Chloride (Cl): ≤ 0.0005 %
Phosphate (PO₄): ≤ 0.0005 %
Silicate (SiO₂): ≤ 0.001 %
Sulfate (SO₄): ≤ 0.0005 %
Total nitrogen (N): ≤ 0.0003 %
Heavy metals (as Ag): ≤ 0.0005 %
Heavy metals (as Pb): ≤ 0.0005 %
Al (Aluminium): ≤ 0.0005 %
As (Arsenic): ≤ 0.0001 %
Ca (Calcium): ≤ 0.0005 %
Cu (Copper): ≤ 0.0002 %
Fe (Iron): ≤ 0.0005 %
Hg (Mercury): ≤ 0.00001 %
K (Potassium): ≤ 0.020 %
Mg (Magnesium): ≤ 0.0005 %
Ni (Nickel): ≤ 0.0005 %
Pb (Lead): ≤ 0.0005 %
Zn (Zinc): ≤ 0.001 %
Legal Information
Signal Word
Danger
Hazard Statements
Precautionary Statements
Hazard Classifications
Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1A
WGK
WGK 1
Flash Point(F)
Not applicable
Flash Point(C)
Not applicable
Regulatory Information
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service