1.02129
Chromolith® RP-18 endcapped (monolithic) HPLC Columns
L × I.D. 100 mm x 4.6 mm HPLC Column
Synonym(s):
Chromolith® Performance RP-18 endcapped 100-4.6 HPLC column
About This Item
Recommended Products
Product Name
Chromolith® RP-18 endcapped, L × I.D. 100 mm x 4.6 mm HPLC column
material
PEEK column
Quality Level
Agency
suitable for USP L1
product line
Chromolith®
feature
endcapped
packaging
1 ea of
extent of labeling
18% Carbon loading
parameter
200 bar pressure
45 °C max. temp.
technique(s)
HPLC: suitable
LC/MS: suitable
mass spectrometry (MS): suitable (High)
Looking for similar products? Visit Product Comparison Guide
Related Categories
1 of 4
This Item | 72622 | 69222 | 74549 |
|---|---|---|---|
| application(s) cleaning products | application(s) environmental | application(s) environmental | application(s) environmental |
| format single component solution | format single component solution | format single component solution | format single component solution |
| grade certified reference material, TraceCERT® | grade certified reference material, TraceCERT® | grade certified reference material, TraceCERT® | grade certified reference material, TraceCERT® |
| product line TraceCERT® | product line TraceCERT® | product line TraceCERT® | product line TraceCERT® |
| concentration 1000 mg/L lactate in water (nominal concentration) | concentration 1000 mg/L in water (nominal concentration) | concentration 1000 mg/L in water (nominal concentration) | concentration 1000 mg/L gluconate in water (nominal concentration) |
General description
Chromolith® Performance RP-18 endcapped HPLC columns have macropores with 2 μm diameter, giving a column efficiency exceeding 80,000 plates/meter. The mesopores are 13 nm (130 Å) and the surface modification is octadecylsilane with full end-capping. Chromolith® Performance RP-18 endcapped columns fall under the USP L1 Classification. The column efficiency is comparable to a 5 μm particle size fully porous particulate column.
Chromolith® Performance RP-18 endcapped columns are perfectly suitable for LC-MS applications.
The column dimension of 100 mm length and 4.6 mm I.D. is the best choice for separations of complex samples on any HPLC System.
The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
- Rapid separations at very low column back-pressure
- High matrix tolerance, allowing time and cost savings with simplified workflows
- Cost savings due to extended column lifetimes
- Connection of columns, flow gradients and the use of mobile phases with higher viscosity
The recommended Guard-columns are:
Chromolith® RP-18 endcapped 5-4.6 guard cartridges (3 pieces) [1.51452] with the Chromolith® Guard Cartridge Holder 5 mm x 4.6 mm [1.52032] Or Chromolith® RP-18 endcapped 10-4.6 guard cartridges (3 pieces) [1.51451] with the Chromolith® Guard Cartridge Holder 10 mm x 4.6 mm [1.52033]
The Chromolith® column coupler can be used to significantly increase the separation efficiency of Chromolith® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467]
Need more efficiency?
Chromolith® HighResolution RP-18 endcapped 100-4.6 HPLC columns [1.52022] provide a column efficiency exceeding 140,000 plates/meter.
Learn more:
Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC Columns
All Supelco HPLC Columns, including monolithic Chromolith® columns, are fully compatible to all HPLC and UHPLC Instruments.
Supelco HPLC Products: The Best Choice for Any LC Instrument
Application
- Salt pollution reduces turbidity, dissolved organic matter, and cyanobacteria in experimental vernal pool communities: Discusses environmental applications of calcium chloride, focusing on its use in managing ecosystems affected by salt pollution, demonstrating its role in environmental remediation and management. (Vigil and Schuler, 2024).
Analysis Note
Carbon content: 17,0 - 18,6 %
Pressure: ≤ 30 bar
stability testing: conforms
Performance (anthracene)
Theoretical Plates (N/m) (Anthracene): ≥ 80000
Capacity factor (Anthracene): 3,9 - 4,6
Tailing (USP): 0,90 - 1,60 %
Selectivity
separation factor (anthracene/progesterone): 1,95 - 2,35
Legal Information
related product
Storage Class Code
10-13 - German Storage Class 10 to 13
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Articles
Chromolith® RP-18e columns optimize Oligo Standard 6 separation with varied flow rates and ion-pairing reagent evaluation.
LC-UV-MS workflow details teriparatide peptide mapping, including enzymatic digestion, separation conditions, and QTOF mass spectrometer identification.
Monolithic silica HPLC columns enable high-throughput analysis at low back pressure without loss of separation efficiency or peak capacity.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service
