Recommended Products
form
liquid
contains
1.25 g/L±0.125 g/L stabilizer
0.015 g/L±0.0015 g/L wetting agent
4.25 g/L±0.25 g/L Stress reducer
composition
30 g/L ±0.5 g/L H3BO3
170g/L ±5 g/L Ni(SO3NH2)2.4H2O
9.51 g/L ±1 g/L NiBr2 .xH2O
Looking for similar products? Visit Product Comparison Guide
Related Categories
General description
Features and Benefits
- Deposits have low internal stress and are very ductile.
- Surfaces are uniform and smooth with well-controlled thickness and excellent uniformity.
- As plated Ni films have small grains in the range of 10 - 50 nm. Grain size orientations are (111) and (200) for FCC (face centred cubic).
- Qualified bath metrology for replenishment and a long shelf life.
Electroplated Ni film (5-10 μm thickness) properties:
- Density: 8.1 g/cm3
- Young′s modulus: 210 GPa
- Internal stress 33 ± 13 MPa
- Tensile strength: 585 ± 40 MPa
- Grain size: 10-50 nm
Signal Word
Danger
Hazard Statements
Precautionary Statements
Hazard Classifications
Aquatic Chronic 2 - Carc. 1A Inhalation - Eye Dam. 1 - Muta. 2 - Repr. 1B - Resp. Sens. 1 - Skin Sens. 1 - STOT RE 1 - STOT RE 2 Inhalation
Target Organs
Respiratory Tract
WGK
WGK 3
Flash Point(F)
Not applicable
Flash Point(C)
Not applicable
Regulatory Information
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service