All Photos(1)
1′,1′′,4′,4′′-Tetrahydro-di[1,4]methanonaphthaleno[1,2:2′,3′,56,60:2′′,3′′][5,6]fullerene-C60, C60 derivative, indene-C60 bisadduct
C78H16
Recommended Products
Assay
99.9% (HPLC)
form
solid
mp
236-241 °C
Looking for similar products? Visit Product Comparison Guide
General description
The performance of indene-C60 bisadduct (ICBA) as organic solar cell (OSC) has been described in a study. Simple preparation and high solubility in organic solvents renders ICBA as an efficient substitute to [6,6]-phenyl-C61 butyric acid methyl ester (PCBM).
Application
A ternary bulk heterojunction system (BHJ) may be fabricated with ICBA/ low band gap polymer, for IR sensitized organic solar cells. 1-3ICBA/thiazolo-thiazolo donor polymer blend may be used to enhance the charge generation in BHJ solar cells.
The addition of substituents to a fullerene cage and chemical characterization of the indene-C60 multiadduct gives rise to a reduction of the electron affi nity of the acceptor; resulting in a signifi cant increase in the V oc of devices incorporating these derivatives as the electron acceptor.
Solar Cell (OPV) Device Performance:
ITO/PEDOT:PSS/P3HT:ICBA(1.5:1)/LiF/Al
Solar Cell (OPV) Device Performance:
ITO/PEDOT:PSS/P3HT:ICBA(1.5:1)/LiF/Al
- Short-circuit current density (Jsc): 10.53 mA/cm2
- Open-circuit voltage (Voc): 0.83 V
- Fill Factor (FF): 0.60
- Power Conversion Efficiency (PCE): 5.26 %
Legal Information
Plexcore is a registered trademark of Plextronics; Inc.
Signal Word
Warning
Hazard Statements
Precautionary Statements
Hazard Classifications
Eye Irrit. 2 - Skin Irrit. 2 - STOT SE 3
Target Organs
Respiratory system
WGK
WGK 3
Flash Point(F)
Not applicable
Flash Point(C)
Not applicable
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Journal of the American Chemical Society, 134(35), 14271-14274 (2012-08-18)
We present a novel electron transport (ET) polymer composed of polyfluorene grafted with a K(+)-intercalated crown ether involving six oxygen atoms (PFCn6:K(+)) for bulk-heterojunction polymer solar cells (PSCs) with regioregular poly(3-hexylthiophene) (P3HT) as the donor and indene-C(60) bisadduct (ICBA) or
IR sensitization of an indene-C60 bisadduct (ICBA) in ternary organic solar cells
Energy & Environmental Science, 6 (2013)
Comparative study of spectral and morphological properties of blends of P3HT with PCBM and ICBA.
Organic Electronics, 13(11), 2333-2341 (2012)
Charge Photogeneration for a Series of Thiazolo-Thiazole Donor Polymers Blended with the Fullerene Electron Acceptors PCBM and ICBA.
Advances in Functional Materials, 23(26), 3286-3298 (2013)
Beyond PCBM: Understanding the Photovoltaic Performance of Blends of Indene-C60 Multiadducts with Poly(3-hexylthiophene)
Advances in Functional Materials, 22, 4115-4127 (2012)
Articles
Fabrication procedure of organic field effect transistor device using a soluble pentacene precursor.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service