物料
PVDF
silicone gasket
质量水平
特点
hydrophobic
制造商/商品名称
Prostak™
参数
2.1 bar max. transmembrane pressure (30 psi) at 50-80 °C
4.1 bar max. inlet pressure (60 psi) at 50-80 °C
4.1 bar max. transmembrane pressure (60 psi) at 50 °C
5.5 bar max. inlet pressure (80 psi) at 50 °C
dilution
(concentration and clarification)
高度
12.4 cm (4.9 in.)
长度
38.9 cm (15.3 in.)
宽度
19.8 cm (7.8 in.)
device size
, 20 stack
过滤面积
1.7 m2
membrane nominal area
1.7
重量
6.2 kg (13.7 lb)
基质
Durapore®
孔径
0.45 μm nominal pore size
0.45 μm pore size
pH值（酸碱度）
1-13(short duration)
2-12(continuous)
正在寻找类似产品? 访问 产品对比指南
一般描述
Prostak™ MF Module are a tangential flow filtration device in a stacked plate configuration with Type V screen open feed channel. A microporous membrane, Durapore® polyvinylidene fluoride (PVDF), is bonded on both sides of each plate. The plates are then stacked in parallel forming stacks.
This Prostak™ microfiltration open-channel module features a Pore Size of 0.45 μm and a filtration area of 1.7 m2. SK2P013W4 is available in a 20 stack, making it applicable for bench-top, pilot, and production scale systems.
The modules can be integrity tested and steam sterilized for 20 cycles.
Prostak™ MF modules must be used with a support holder, which controls deflection and provides sanitary fittings for connection to external piping. Sanitary gaskets supplied with the module provide a leak-free connection between the module(s) and the holder.
This Prostak™ microfiltration open-channel module features a Pore Size of 0.45 μm and a filtration area of 1.7 m2. SK2P013W4 is available in a 20 stack, making it applicable for bench-top, pilot, and production scale systems.
The modules can be integrity tested and steam sterilized for 20 cycles.
Prostak™ MF modules must be used with a support holder, which controls deflection and provides sanitary fittings for connection to external piping. Sanitary gaskets supplied with the module provide a leak-free connection between the module(s) and the holder.
应用
Typical Applications
Prostak™ microfiltration is used for separations where viscosity and suspended solids levels of the feed stream require an open feed channel. They are typically used in perfusion applications or in the clarification/harvest of:
Prostak™ microfiltration is used for separations where viscosity and suspended solids levels of the feed stream require an open feed channel. They are typically used in perfusion applications or in the clarification/harvest of:
- Mammalian, bacterial and mycelial cell suspensions
- Emulsions and colloidal suspension
- Viruses, proteins and other bio-organic macromolecular solutions
- Polysaccharides and other high viscosity solutions
- Yeast, algae, and other high solids suspensions
- Protein precipitate
- Vaccines
特点和优势
Type V screen open feed channel
其他说明
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Prefiltration Rquirements: 150 µm
法律信息
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Prostak is a trademark of Merck KGaA, Darmstadt, Germany
法规信息
新产品
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系技术服务部门