Quality Segment
description
Electronic Solvents, Relative Evaporation rate: 1.24
Hansen solubility parameters: SPd = 7.7; SPp = 4.2; SPh = 8.8. , for electronic purposes
assay
≥ 99.0% (GC)
form
liquid
greener alternative product characteristics
Design for Energy Efficiency
Use of Renewable Feedstocks
Learn more about the Principles of Green Chemistry.
impurities
≤0.09 wt. % Acidity (as lactic acid), ≤0.5 wt. % Water (Karl Fischer), ≤1 ppm As, Cr, Cd, Cu, Hg, Mn, Ni, Pb, Zn, trace (ICP, each)
evapn. residue
≤0.05%
color
clear
viscosity
9.8 cP(20 °C)
density
0.8351 at 25 °C (specific gravity)
greener alternative category
storage temp.
2-30°C
General description
ElectroGreen® solvents—our bio-based alternatives that are meticulously engineered to meet the stringent requirements of electronics and energy applications, offering a solution to replace fossil-based solvents.
Our tailored products offer:
Our tailored products offer:
- High purity (GC)
- Low residue in evaporation (RESE)
- Low metal content (ICP)
- Low water content (KF)
- Low acidity
- Low toxicity and VOC
- Accessible cost
This ElectroGreen® solvent is made of bio-based (corn/beets-derived)safer alternatives to replace synthetic propanol/IPA fossil-based solvent with specifications tailored for electronics and energy applications. All our ElectroGreen® solvents line are derived from a renewable resource (verified through C14 ASTM D6866-16 testing). We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. Click here for more details.
This solvent blend consists of ethanol 70-90%, Ethyl lactate 20-30%, ethyl acetate 1-5%.
Increase safety and use less chemicals in semiconductor manufacturing thereby reducing costs
This solvent blend consists of ethanol 70-90%, Ethyl lactate 20-30%, ethyl acetate 1-5%.
Increase safety and use less chemicals in semiconductor manufacturing thereby reducing costs
Application
Our Isopropyl Alcohol substitute is a blend of bio-based solvents that provide excellent cleaning properties on electronics: dries quickly, and provides a clean, non-residue surface. Ideal for dilution in a hot water spray at time of use. Suitable replacement for Isopropyl Alcohol (IPA).
Preparation Note
To ensure low water content, handle under inert conditions. Product should be refrigerated upon receipt.
Legal Information
ElectroGreen is a registered trademark of Merck KGaA, Darmstadt, Germany
Still not finding the right product?
Explore all of our products under ElectroGreen®
signalword
Danger
hcodes
Hazard Classifications
Eye Dam. 1 - Flam. Liq. 2 - STOT SE 3
target_organs
Respiratory system
存储类别
3 - Flammable liquids
wgk
WGK 1
flash_point_f
52.0 °F
flash_point_c
11.1 °C