Skip to Content
Merck
CN
  • Root biomass production in populations of six rooted macrophytes in response to Cu exposure: intra-specific variability versus constitutive-like tolerance.

Root biomass production in populations of six rooted macrophytes in response to Cu exposure: intra-specific variability versus constitutive-like tolerance.

Environmental pollution (Barking, Essex : 1987) (2014-07-25)
L Marchand, F Nsanganwimana, J B Lamy, C Quintela-Sabaris, C Gonnelli, I Colzi, T Fletcher, N Oustrière, A Kolbas, P Kidd, F Bordas, P Newell, P Alvarenga, A Deletic, M Mench
ABSTRACT

Intra-specific variability of root biomass production (RP) of six rooted macrophytes, i.e. Juncus effusus, Phragmites australis, Schoenoplectus lacustris, Typha latifolia, Phalaris arundinacea, and Iris pseudacorus grown from clones, in response to Cu exposure was investigated. Root biomass production varied widely for all these macrophytes in control conditions (0.08 μM) according to the sampling site. Root biomass production of T. latifolia and I. pseudacorus in the 2.5-25 μM Cu range depended on the sampling location but not on the Cu dose in the growth medium. For P. australis, J. effusus, S. lacustris, and P. arundinacea, an intra-specific variability of RP depending on both the sampling location and the Cu-dose was evidenced. This intra-specific variability of RP depending on the sampling location and of Cu-tolerance for these last four species suggests that Cu constitutive tolerance for all rooted macrophytes is not a species-wide trait but it exhibits variability for some species.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Copper, beads, 2-8 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Copper, beads, 2-8 mm, 99.9995% trace metals basis
Sigma-Aldrich
Copper, foil, thickness 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Copper, turnings, purum p.a., ≥99.0%
Sigma-Aldrich
Copper, wire, diam. 1.0 mm, ≥99.9%
Sigma-Aldrich
Copper, foil, thickness 0.025 mm, 99.98% trace metals basis
Sigma-Aldrich
Copper, foil, thickness 0.5 mm, 99.98% trace metals basis
Sigma-Aldrich
Copper, wire, diam. 2.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Copper, wire, diam. 0.64 mm, 99.995% trace metals basis
Sigma-Aldrich
Copper, wire, diam. 0.25 mm, 99.999% trace metals basis
Sigma-Aldrich
Copper, powder, <75 μm, 99%
Copper - O.F.H.C., foil, 50x50mm, thickness 0.1mm, half hard, 99.95+%
Copper - O.F.H.C., foil, 50x50mm, thickness 2.0mm, half hard, 99.95+%
Copper - O.F.H.C., foil, 25x25mm, thickness 0.5mm, half hard, 99.95+%
Copper - O.F.H.C., foil, 0.5m coil, thickness 0.1mm, hard, 99.95+%
Copper - O.F.H.C., foil, 10m coil, thickness 0.05mm, annealed, 99.95+%
Copper - O.F.H.C., foil, 300x300mm, thickness 1.6mm, hard, 99.95+%
Sigma-Aldrich
Copper, foil, ≥99.8% (complexometric)
Copper, tube, 1000mm, outside diameter 1.2mm, inside diameter 0.56mm, wall thickness 0.32mm, as drawn, 99.9%
Copper, wire reel, 1000m, diameter 0.04mm, hard, 99.9%
Copper - O.F.H.C., foil, 5m coil, thickness 0.1mm, coil width 100mm, hard, 99.95+%
Copper - O.F.H.C., foil, 2m coil, thickness 0.125mm, hard, 99.95+%
Copper - O.F.H.C., foil, 6mm disks, thickness 0.075mm, half hard, 99.95+%
Copper - O.F.H.C., foil, 2m coil, thickness 0.20mm, hard, 99.95+%
Copper - O.F.H.C., foil, 5m coil, thickness 0.075mm, half hard, 99.95+%
Copper, wire reel, 1000m, diameter 0.05mm, annealed, 99.9%
Copper - O.F.H.C., foil, 300x300mm, thickness, 0.5mm, half hard, flattened, 99.95+%
Copper - O.F.H.C., foil, 2m coil, thickness 0.025mm, hard, 99.95+%
Copper, wire reel, 1000m, diameter 0.075mm, annealed, 99.9%
Copper, wire reel, 100m, diameter 1.0mm, as drawn, 99.98+%