- Direct synthesis of pentafluoroethyl copper from pentafluoropropionate as an economical C2F5 source: application to pentafluoroethylation of arylboronic acids and aryl bromides.
Direct synthesis of pentafluoroethyl copper from pentafluoropropionate as an economical C2F5 source: application to pentafluoroethylation of arylboronic acids and aryl bromides.
Organic letters (2014-06-14)
Hiroki Serizawa, Kohsuke Aikawa, Koichi Mikami
PMID24926803
ABSTRACT
The direct synthesis of pentafluoroethyl copper (CuC2F5) from a cuprate reagent and ethyl pentafluoropropionate as one of the most economical and useful pentafluoroethyl sources was accomplished. The advantages of this method are; all the reagents employed are low-cost and operationally simple, and the CuC2F5 reagent is prepared in virtually quantitative yield. Furthermore, the CuC2F5 reagent prepared was successfully applied to two types of pentafluoroethylations with arylboronic acids and aryl bromides to provide the pentafluoroethylated aromatic products in good-to-excellent yields, including large scale operations.
MATERIALS
Product Number
Brand
Product Description
Copper, insulated wire, 50m, conductor diameter 0.025mm, insulation thickness 0.005mm, polyurethane insulation, 99.99%
Copper, insulated wire, 200m, conductor diameter 0.5mm, insulation thickness 0.06mm, polyimide insulation
Copper, insulated wire, 5m, conductor diameter 0.7mm, insulation thickness 0.01mm, polyurethane insulation
Copper - O.F.H.C., foil, 300x300mm, thickness 0.1mm, half hard, 99.95+%
Copper, insulated wire, 50m, conductor diameter 0.1mm, insulation thickness 0.015mm, 10-30 micron polyesterimide insulation, 99.9%
Copper - O.F.H.C., foil, 100x100mm, thickness 0.7mm, half hard, 99.95+%
Copper, insulated wire, 100m, conductor diameter 0.1mm, insulation thickness 0.005mm, polyurethane insulation, 99.9%
Copper, insulated wire, 20m, conductor diameter 0.125mm, insulation thickness 0.01mm, polyimide insulation, 99.99%
Copper, insulated wire, 10m, conductor diameter 0.5mm, insulation thickness 0.06mm, polyimide insulation
Copper - O.F.H.C., foil, 0.5m coil, thickness 0.125mm, hard, 99.95+%
Copper, mesh, 300x300mm, nominal aperture 0.38mm, wire diameter 0.25mm, 40x40 wires/inch, open area 37%, plain weave mesh
Copper, insulated wire, 250m, conductor diameter 0.05mm, insulation thickness 0.002mm, 2 micron polyesterimide insulation, 99.9%
Copper, insulated wire, 1m, conductor diameter 0.45mm, insulation thickness 0.25mm, PTFE (polytetrafluoroethylene) insulation
Copper, microfoil, disks, 25mm, thinness 0.25μm, specific density 219.9μg/cm2, permanent mylar 3.5μm support, 99.99+%
Copper, insulated wire, 5m, conductor diameter 1.0mm, insulation thickness 0.25mm, PTFE (polytetrafluoroethylene) insulation
Copper - O.F.H.C., foil, 300x300mm, thickness 0.1mm, hard, 99.95+%
Copper, insulated wire, 50m, conductor diameter 0.24mm, insulation thickness 0.25mm, PTFE (polytetrafluoroethylene) insulation
Copper, rod, 500mm, diameter 2.0mm, as drawn, 99.99+%
Copper - O.F.H.C., wire reel, 5m, diameter 0.25mm, as drawn, 99.95+%
Copper, insulated wire, 5m, conductor diameter 0.1mm, insulation thickness 0.005mm, polyurethane insulation, 99.9%
Copper - O.F.H.C., foil, 25x25mm, thickness 0.25mm, annealed, 99.95+%
Copper, insulated wire, 1m, conductor diameter 1.0mm, insulation thickness 0.25mm, PTFE (polytetrafluoroethylene) insulation
Copper, insulated wire, 20m, conductor diameter 0.025mm, insulation thickness 0.005mm, polyurethane insulation, 99.99%
Copper - O.F.H.C., foil, 10m coil, thickness 0.010mm, coil width 25mm, hard, 99.95+%
Copper - O.F.H.C., foil, 50x50mm, thickness 2.0mm, half hard, 99.95+%
Copper - O.F.H.C., foil, 300x300mm, thickness 0.20mm, hard, 99.95+%