739316
PEDOT:PSS
conductive inkjet ink, 0.8% aqueous dispersion
Synonym(s):
Orgacon™ IJ-1005, PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)
About This Item
Recommended Products
Product Name
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), 0.8% in H2O, conductive inkjet ink
Quality Level
form
liquid
contains
1-5% Ethanol
5-10% Diethylene glycol
greener alternative product characteristics
Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.
sustainability
Greener Alternative Product
concentration
0.8% in H2O
sheet resistance
110 Ω/sq
refractive index
n20/D 1.340
pH
1.5-2.5
viscosity
7-12 cP(22 °C)
density
0.985 g/mL at 25 °C
greener alternative category
, Enabling
storage temp.
2-8°C
Looking for similar products? Visit Product Comparison Guide
General description
PEDOT:PSS has high electrical conductivity and good oxidation resistance, the properties which make it suitable for electromagnetic shielding and noise suppression. Thus, the polymeric film formed possesses high transparency throughout the visible light spectrum and even in near IR and near UV regions, displaying virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm was observed.
Application
Legal Information
Storage Class Code
10 - Combustible liquids
WGK
WGK 2
Flash Point(F)
Not applicable
Flash Point(C)
Not applicable
Choose from one of the most recent versions:
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Which document(s) contains shelf-life or expiration date information for a given product?
If available for a given product, the recommended re-test date or the expiration date can be found on the Certificate of Analysis.
How do I get lot-specific information or a Certificate of Analysis?
The lot specific COA document can be found by entering the lot number above under the "Documents" section.
How do I find price and availability?
There are several ways to find pricing and availability for our products. Once you log onto our website, you will find the price and availability displayed on the product detail page. You can contact any of our Customer Sales and Service offices to receive a quote. USA customers: 1-800-325-3010 or view local office numbers.
What is the Department of Transportation shipping information for this product?
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
Is a dried film of product 739316 (poly(3,4-Ethylenedioxythiophene)-poly(styrenesulfonate)) stable in air in a laboratory environment?
Product 739316 (poly(3,4-Ethylenedioxythiophene)-poly(styrenesulfonate)) is susceptible to oxidation and photo degradation, however, our supplier has outlined that this concern is in reference to exposure to strong oxidizing agents and UV light in particular. The product when dried on target will be stable in a typical lab air environment, however, one will notice degradation and lack of conductivity when exposed to UV light, strong oxidizing conditions, heat, and or high humidity for extended periods of time.
Why does product 739316, Orgacon™ IJ-1005, have a low pH?
Orgacon™ IJ-1005 has a low pH because this ink is intended for use as an HIL (hole-injection layer) in OLED materials. Increasing pH would negatively affect the workfunction, but if you want to print on textiles to obtain conducting lines, you can slightly adjust the pH with amonia or an organic amine base. The ink is in water and typically needs to reach 130°C for drying.
What can you tell me regarding the method of preparation of the PEDOT/PSS products, such as Products 768618 and 739316?
The information on the molecular weights of the PEDOT and PSS used to make each batch is held as proprietary.The exact information on the relative amounts (by weight) of the PEDOT and PSS present in these polymers is also held as proprietary. There is a little more PSS than PEDOT; this is logical, since the formula weight for the monomeric equivalent in PSS (C7H6SO3) is a little higher than the formula weight for the monomeric equivalent in PEDOT (C6H4SO2).The solution, product 739316 is made in situ; it is not made from the dry pellets (product 768618).
My question is not addressed here, how can I contact Technical Service for assistance?
Ask a Scientist here.
Articles
A detailed article on conducting polymer materials for flexible organic photovoltaics (OPVs) applications.
In the field of organic printable electronics, such as OLEDs and organic photovoltaics (OPVs), improved organic conducting and semiconducting materials are needed. The progress in two fields is reviewed in this article.
Conducting polymers such as polyaniline, polythiophene and polyfluorenes are now much in the spotlight for their applications in organic electronics and optoelectronics.
Functional materials for printed electronics applications enable flexible displays, RFID tags, and biomedical sensors.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service